Carbon Monoxide Detector Singapore

Carbon Monoxide (CO) is a colourless, tasteless and odourless compound produced by partial combustion of carbon-containing materials. It is also known as the “silent killer” because it is virtually undetectable without using detection technology. Identification of CO leakage is difficult in the home. Increased CO level can be dangerous to human depending on the amount present and the period of exposure. Smaller concentrations can be harmful over longer periods of time while increasing concentrations require reducing exposure times to be harmful.

Function of Carbon Monoxide Detector

Carbon Monoxide Detector or CO detector has features which are built to measure CO levels over time and can trigger an alarm before it reaches a dangerous level as the CO accumulate in the environment. It will give an early warning to ventilate the place or evacuate to a safe location.

It can detect and warn people about the harmful level of carbon monoxide buildup due to leakage from the defective fuel-consuming device. At home, some of the common sources of CO include open flames, water heaters or a vehicle left with its engine on. It any of these flames or appliances left unattended can cause carbon monoxide poisoning which is detrimental.

The detector can be AC powered or battery-operated. The lifetime of the battery has increased with the new technology. Some of the detectors use the rechargeable battery and all have test buttons similar to smoke detectors. The detector can be tested if it is operational and active. However, most of the detectors do not have replaceable sensors. CO detector is very easy to install and can be placed near the ceiling or on the floor because CO is very close to the same density as air.

Where to install Carbon Monoxide Detector?

Installation of a Carbon Monoxide Detector in your home or workplace is important where this device can increase the speed of detecting a danger. The behaviour of Smoke and Carbon Monoxide Detectors react differently where each requires different optimum places in installations. In general, we should install the Carbon Monoxide detector at least 1.5 meters above the ground. The Carbon Monoxide detector can be commonly found in places:

• Commercial buildings
• Schools
• Home

What is the difference between Carbon Monoxide Detector and Smoke Detector?

The functions of Carbon Monoxide Detector cannot serve as a Smoke Detector or vice versa. As its name implies, CO detector detects Carbon Monoxide and warn you of dangerous CO buildup caused, for example, by the malfunctioning oven, water heater or clothes dryer. The Smoke Detector detects the smoke generated by flaming or smouldering fires. CO Detector and smoke alarms give people a few extra minutes or even seconds to leave their homes before being attacked by smoke, fumes or fire. Both smoke alarm and Carbon Monoxide detector can save lives and are critical to your family’s safety. Avoid disaster, install now!